Product Specifications:

Maximum weight capacity: 4 ton.

Minimum height: 75mm.

Maximum height: 505mm.

Gross weight - 34.5 kg

66inch 10drawers Metal Roller Tool Cabinet

Product Size:1672mmx501mmx859mm

Jobsite C-40 2.4hp Petrol Compaction Plate

The Jobsite C40 is powered by 79cc 4-stroke recoil start petrol engine and equipped with a good size plate 410mm x 280mm (L x W). With travelling speed of 25m/min and a compaction depth of 150mm, this compaction plate for jobs both large and small, such as building driveways, patios, decking, block paving and more.

POWERFUL 1700W 2.4HP TWO STROKE PETROL JACK HAMMER / BREAKER by Jobsite

2" Petrol Concrete Poker with 6 meter Hose 

The Jobsite Concrete Poker Drive Unit is powered by an excellent Loncin engine. This machine is made with an easy to carry frame and is mounted on a swivel base.

Petrol Post Rammer, Pile Driver, Post Knocker NEW 37.7cc 4 Stroke engine CT4343

Applications: Fencing, Star pickets, Posts, Stakes,Pipe driving

Motorcycle Lift Jack 600kg Neilsenn Light Duty

2.5 Ton Hydraulic Floor / Trolley Jack with Dual Lift Pistons

Steel Wall Mounted Tool Cabinet/Tool Storage

Overall size:1180(W)*195(D)*602(H)mm

Load capacity: 90kgs

Folding Work EVA Foam Mat 

Transmission Oil Changing Machine
Cycle Cleaning
Equal Oil Change
Model : ATF-20DT
Rated Voltage : 220V - 240V AC
Rated Frequency : 50 / 60Hz
Pressure Gauge Range : 0 - 150psi
Filter Accuracy : 5um
Pipe Length : 2.5M
No Load Speed : 0 - 3000 rpm
Net Weight : 28kg
Gross Weight : 30kg

Motorcycle Table Lift - Heavy Duty

17 Pieces Diesel Injector Seat Cutter Set

This set is used to clean and decarbonise injector seats when changing injectors.

It helps to avoid blow-back due to poorly seated injectors.

Suitable for a wide range of vehicles.

20 Gallon 90L Parts Washer 240v

NEILSEN Fuel Filter Tool For Diesel Jtd / Cdti / Ddis / Tid / Vcdi / Hdi

For changing the fuel filter insert in Chevrolet, Citroen, Fiat, Saab, Suzuki, Opel, Vauxhall
Prevents damage to the housing assembly.

NEILSEN Heavy Duty 12pc Punch And Chisel Set

1/2dr Stud Extractor/installer Set - 4pc 6-8-10-12mm

NEILSEN 2lb (0.9kg) Copper Hammer with Fibreglass Shaft

16oz Claw Hammer all forged with soft grip handle

Product Description:
24oz Claw Hammer with TPR Handle

Garage Tool and Equipment Storage Cabinet

Overall size : L 3250mm / H 1950mm / W 500mm

36 Inch Stainless Steel Roller Cabinet

Dimensions: 

L: 36 inch / 91.4cm

W: 18 inch / 45.7cm

H: 48.5 inch / 123.4cm

Tool Box - Workshop Storage

Product size:L: 84 inch/213.4cm.

W: 20 inch/50.8cm

H: 58 inch/147.3cm.

Rolling Workbench 48 Inch Stainless Steel

Size:

Width:48 inch 121cm

Length:19 inch 48.2cm

Height:37.25 inch 94.6cm

119pcs 1/2"dr 3/8"dr Impact Socket Set

219pcs 1/4inch & 3/8inch & 1/2inch Drive Socket Set

94pc 1/4 and 1/2 inch Drive Socket Set

Automotive Socket Bit Set 38pc Neilsen

Suitable for a wide range of specialist vehicle based applications including headlight alignment on Alfa Romeo and Fiat, cylinder head removal on VAG vehicles, ball joint removal/installation on VAG vehicles, braking systems on Audi, BMW, Ford and VW and airbag retaining screws on VW vehicles.

Rolling Workbench 60 Inch Stainless Steel

Size:

Width:60 inch 152cm

Length:19 inch 48.2cm

Height:37.25 inch 94.6cm

Stud Extractor / Installer Set - 4pc 6-8-10-12mm & 1/2dr