Product Specifications:

Width: 148mm

Hight: 76mm

Product Specifications:

Maximum weight capacity: 4 ton.

Minimum height: 75mm.

Maximum height: 505mm.

Gross weight - 34.5 kg

Jobsite C-40 2.4hp Petrol Compaction Plate

The Jobsite C40 is powered by 79cc 4-stroke recoil start petrol engine and equipped with a good size plate 410mm x 280mm (L x W). With travelling speed of 25m/min and a compaction depth of 150mm, this compaction plate for jobs both large and small, such as building driveways, patios, decking, block paving and more.

POWERFUL 1700W 2.4HP TWO STROKE PETROL JACK HAMMER / BREAKER by Jobsite

2" Petrol Concrete Poker with 6 meter Hose 

The Jobsite Concrete Poker Drive Unit is powered by an excellent Loncin engine. This machine is made with an easy to carry frame and is mounted on a swivel base.

Petrol Post Rammer, Pile Driver, Post Knocker NEW 37.7cc 4 Stroke engine CT4343

Applications: Fencing, Star pickets, Posts, Stakes,Pipe driving

Makita KT001GZ 40v Max XGT Cordless Kettle Body Only

Boil water wherever the job takes you with the 40V Max XGT Kettle. With an 800ml water capacity the KT001G will boil water at 23°C in 8-minutes. The durable design with dual layer insulation has high heat retention on the inside while keeping the housing cool to touch on the outside. Additionally packed with a handful of safety features, the kettle has a tip over spill guard preventing water from spilling out if the kettle is knocked over. An auto shutoff with boil dry protection and ground sensor ensuring the base must be on a
flat surface before boiling. Whether you on a camping trip, at the park or on a jobsite, the KT001G is a must have for your next adventure.

Powered by single 40V Max battery – there are 2 battery terminals for increased runtime however the kettle can operate with a single 40V Max battery. 

Makita GA038GZ07 40v Max XGT Brushless 230mm Angle Grinder Body Only

The Makita GA038GZ07 is a cordless angle grinder, part of Makita's high powered 40v XGT range. It features a brushless motor, for longer tool life, as well as an electric brake and ergonomic design for soft grip and comfortable use. Plus, it uses Makita's AWS system to allow it to connect with compatible dust extractors via Bluetooth - making it easier than ever to keep your workspace clean and tidy.

Supplied body only - this tool requires Makita 40v XGT Lithium-Ion battery packs to operate.

Motorcycle Lift Jack 600kg Neilsenn Light Duty

2.5 Ton Hydraulic Floor / Trolley Jack with Dual Lift Pistons

Folding Work EVA Foam Mat 

Transmission Oil Changing Machine
Cycle Cleaning
Equal Oil Change
Model : ATF-20DT
Rated Voltage : 220V - 240V AC
Rated Frequency : 50 / 60Hz
Pressure Gauge Range : 0 - 150psi
Filter Accuracy : 5um
Pipe Length : 2.5M
No Load Speed : 0 - 3000 rpm
Net Weight : 28kg
Gross Weight : 30kg

Motorcycle Table Lift - Heavy Duty

17 Pieces Diesel Injector Seat Cutter Set

This set is used to clean and decarbonise injector seats when changing injectors.

It helps to avoid blow-back due to poorly seated injectors.

Suitable for a wide range of vehicles.

20 Gallon 90L Parts Washer 240v

NEILSEN Fuel Filter Tool For Diesel Jtd / Cdti / Ddis / Tid / Vcdi / Hdi

For changing the fuel filter insert in Chevrolet, Citroen, Fiat, Saab, Suzuki, Opel, Vauxhall
Prevents damage to the housing assembly.

NEILSEN Heavy Duty 12pc Punch And Chisel Set

1/2dr Stud Extractor/installer Set - 4pc 6-8-10-12mm

119pcs 1/2"dr 3/8"dr Impact Socket Set

C60 PLATE COMPACTOR WITH 6.5HP LONCIN PETROL ENGINE

When you require good compaction from a robust heavy duty wacker plate, the Jobsite C60 is a perfect choice. Powered by a  Genuine Loncin Engine, it provides effective compaction on patios, extensions, landscaping and other groundwork jobs.