DeWALT DCF899 XR Brushless High Torque Impact Wrench with 3 speed and torque settings that gives you the control to best suit your application. The 1/2in (13mm) square drive with detent pin allows for more efficient torque delivery and excellent socket retention. It is fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control.

Estwing 20oz Vinyl Grip Curved Claw Hammer

The Estwing E3 series curved claw hammers have a vinyl grip made from liquid vinyl bonded on to the shaft during production this results in very good comfort and durability but at the time reduces vibrations caused by impact.

1/2"BSPT Male - 1/4"BSP Female Adaptors and wall bracket

Max. 150psi

Motorcycle Lift Jack 600kg Neilsenn Light Duty

2.5 Ton Hydraulic Floor / Trolley Jack with Dual Lift Pistons

Folding Work EVA Foam Mat 

Transmission Oil Changing Machine
Cycle Cleaning
Equal Oil Change
Model : ATF-20DT
Rated Voltage : 220V - 240V AC
Rated Frequency : 50 / 60Hz
Pressure Gauge Range : 0 - 150psi
Filter Accuracy : 5um
Pipe Length : 2.5M
No Load Speed : 0 - 3000 rpm
Net Weight : 28kg
Gross Weight : 30kg

Motorcycle Table Lift - Heavy Duty

17 Pieces Diesel Injector Seat Cutter Set

This set is used to clean and decarbonise injector seats when changing injectors.

It helps to avoid blow-back due to poorly seated injectors.

Suitable for a wide range of vehicles.

20 Gallon 90L Parts Washer 240v

NEILSEN Fuel Filter Tool For Diesel Jtd / Cdti / Ddis / Tid / Vcdi / Hdi

For changing the fuel filter insert in Chevrolet, Citroen, Fiat, Saab, Suzuki, Opel, Vauxhall
Prevents damage to the housing assembly.

NEILSEN Heavy Duty 12pc Punch And Chisel Set

1/2dr Stud Extractor/installer Set - 4pc 6-8-10-12mm

NEILSEN 2lb (0.9kg) Copper Hammer with Fibreglass Shaft

16oz Claw Hammer all forged with soft grip handle

Product Description:
24oz Claw Hammer with TPR Handle

119pcs 1/2"dr 3/8"dr Impact Socket Set

219pcs 1/4inch & 3/8inch & 1/2inch Drive Socket Set

94pc 1/4 and 1/2 inch Drive Socket Set

Automotive Socket Bit Set 38pc Neilsen

Suitable for a wide range of specialist vehicle based applications including headlight alignment on Alfa Romeo and Fiat, cylinder head removal on VAG vehicles, ball joint removal/installation on VAG vehicles, braking systems on Audi, BMW, Ford and VW and airbag retaining screws on VW vehicles.

Stud Extractor / Installer Set - 4pc 6-8-10-12mm & 1/2dr

Neilsen 100L Belt Drive Workshop Garage Air Compressor 3HP 

•Aluminium cylinder head with cast iron cylinder gives added resistance to wear

•Suitable for professional garage, body shop and industrial applications.

•Pump head directly coupled to heavy-duty induction motor for reliable and quiet operation

•Fitted with fully automatic pressure cut-out switch with twin gauges displaying tank and working pressures

•Twin Outlet Valve

•Wheels and Transport Handle

•Thermal Motor

•Protection Overload

•On-Off Pressure Switch

Suitable for both, manual and impact wrenches. Sockets have plastic covers for protection of alloy rims.

Maximum torque limit of 475Nm

3LB steel, double faced, club hammer

US PRO 2152

Drop-forged and heat treated for added strength.

Features deeply serrated jaws on curved and long nose pliers 

Hex, Spline, Torx & Tamper Proof Torx Bit Set

Ideal for removing rust, paint and descaling

US PRO Tools M14 X 1.25P Taper & Plug Set ( Tap & Die ) 2641

Set of 8 adaptors for converting impact drive sizes.